RED LINE Wheeled Units Carbon Dioxide


RED LINE Carbon Dioxide Wheeled Fire Extinguishers are designed to protect areas where Class B (flammable liquids and gases) or Class C (energized electrical equipment) fires could occur. They may be used indoors where winds and drafts do not affect discharge or where a clean extinguishing agent is required. These extinguishers provide maximum protection in settings such as aircraft hangars, paint spray booths, quench tanks, and metal tube manufacturing.

Carbon dioxide is a non-corrosive, non-damaging extinguishing agent that leaves no residue after a fire. Carbon dioxide provides its own pressure for discharge, and because it is a gas, it will penetrate and spread to all parts of a hazard. Because carbon dioxide displaces oxygen, appropriate safety measures must be taken to evacuate enclosed areas where discharged.

red_line_wheeled_carbon_dioxide.png

red_line_wheeled_carbon_dioxide.png

  • Documents
  • Features
Document Type  
Language
                    


Document Name Document Type (A-Z) Language FileName Action
ANSUL FIRE SCHOOL Product Overview Brochure/Flyer English F-2016308.pdf View
SENTRY CD-50-D-1 and CD-100-D-1 Carbon Dioxide Wheeled Extinguishers Data/Specifications Sheet (Rev. 04) Data/Specification Sheet English F-2003135.pdf View
ANSUL "A Guide for Meeting NFPA 10 Subsection 5.5.1.1" Technical Bulletin Technical Bulletins English F-2016315.pdf View
ANSUL Technical Bulleltin No. 50 - Hydrostatic Retest Requirements for ANSUL Portables, Wheeled Units and Pre-Engineered Vessels (Rev. 07) Technical Bulletins English F-81301.pdf View
ANSUL Technical Bulletin No. 58 - Replacement Components and Service Technical Bulletins English F-8922.pdf View
ANSUL Technical Bulletin No. 51 - Re-Use of Dry Chemical Agents Technical Bulletins English F-8202.pdf View
ANSUL Technical Bulletin No. 38 - Fire Protection for Metal Alkyls (Rev. 01) Technical Bulletins English F-8086.pdf View
ANSUL FIRE SCHOOL 2017 Class Schedule (Rev. 13) Training Information English F-2004210.pdf View

Features

Additional product features:

  • Simple operation and maintenance
  • Portable, compact design
  • Non-corrosive, non-conductive, clean extinguishing agent
  • Available in 50 lb (22.7 kg) and 100 lb (45.4 kg) models
  • UL or ULC listing available DOT / TC approved steel cylinder
  • One-person operation
  • Large 16 in. (406 mm) semi-pneumatic rubber wheels 
  • Rubber-jacketed, wire braided, high pressure discharge hose

 

Skip to main content
Product Detail